Sequential Flash Control Module, 14+14 Channel, GND power/control Ver 2.00 | each
$34.00
Product Details
Sequential Control Module,
14+14 Channels
14 Channel Color A (typically White or Red)
14 Channel Color B (typically Yellow/Amber)
GND power/control Ver 2.00 | each
300mA per channel MAX
Thank you for purchasing CorsoMotion’s LED sequential modules Ver2.00. With a very easy DIP switch function selector, you can choose functions from popular sequential motions.
These LED sequential modules are designed to work with our ‘Custom Made Boards’ however, if you use less than 300mA per channel, other LED setups should be fine.
These LED sequential modules require 12v car power and ground to operate. The input voltage for these modules is 12v car power and the outputs to control the LEDs operate on the ground.
The current version does not support the Input ‘O’
Functions
Mode switch:
You will use this module to your headlight or taillight. You can choose the mode with DIP switch #9.
9:Off – Taillight mode
9:On – Headlight mode
Most of the animation functions will be the same but the major difference is,
When the taillight mode is chosen, when parking or brake lights LEDs (red) are ON, and when the Turn signal is On, the module Keep TURNING ON the parking light LEDs ( please imagine regular taillights )
When the headlight mode is chosen, when the parking lights LEDs (white) are ON, and when the Turn signal is On, the module TURNS OFF the parking light LEDs ( such as the switchback module )
Parking Lights:
The module can get the 12v power from ‘Parking lights +’ or ‘Headlights +’ and it will control the parking lights. A preset animation will be played once and LEDs will stay ON. You can choose 4 LED animation designs. {DIP switch Ch. 7, 8}.
7:Off 8:Off – No animation, just ON instantly 100% brightness
7:Off 8:On – Animation style A
7:On 8:Off – Animation style B
7:On 8:On – Animation style C
Brakes:
The module can get the 12v power from Brake + and it will control the brake lights. A preset ‘Blink’ and ‘Pulse’ animation will be played once and LEDs will stay ON.
You can choose the blink time from no blink to blinks 3 times, {DIP switch Ch. 1, 2}. Also, you can adjust flicker speed by 10 steps using a dial on the board.
1:Off 2:Off – No blink, just ON instantly 100% brightness
1:Off 2:On – Blinks 1 time
1:On 2:Off – Blinks 2 times
1:On 2:On – Blinks 3 times
Blink Dial – Blink speed adjustment with 10 steps
After the flicker animation played once, you can get the Pulse effect {DIP switch Ch. 3} and can adjust the speed of pulse effect by 10 steps using a dial on the board.
3:Off – No pulse, just ON instantly 100% brightness after the blink mode played once
3:On – Pulse animation ON
Pulse Dial – Purse speed adjustment with 10 steps
Turn Signals:
The module can get the 12v power from Turn signal + and it will control the Turn signal lights. A preset ‘Turn Signal’ animation will be played once.
You can choose the Turn Signal animation, {DIP switch Ch. 4,5, and 6}. Also, you can adjust the turn signal animation speed to fit your car’s turn signal speed by 10 steps using a dial on the board.
4:Off 5:Off 6:Off – No Turn Signal animation, just ON instantly 100% brightness
4:Off 5:Off 6:On – Sequentially instantly LEDs ON from Ch.1 to Ch.14
4:Off 5:On 6:Off – All Ch. ON and instantly turns off from Ch.1 to Ch.14
4:Off 5:On 6:On – Same as above but when the LEDs are off, they turn off slowly not instantly
4:On 5:Off 6:Off – Sequentially instantly LEDs ON from Ch.1 to Ch.14 and after 5 Ch. LEDs will turn off instantly
4:On 5:Off 6:On – Same as above but when the LEDs are off, they turn off slowly not instantly
4:On 5:On 6:Off – Sequentially instantly LEDs ON from Ch.1 to Ch.14 and after 10 Ch. LEDs will turn off instantly
4:On 5:On 6:On – Same as above but when the LEDs are off, they turn off slowly not instantly
Recommended parts
Custom Made Boards
Custom Made Board [7x2] 2P Bi-Color, Lens ver. 600x600mil
Custom Made Board [7x4] 2P Bi-Color, Lens ver. 600x600mil
Custom Made Board [7x6] 2P Bi-Color, Lens ver. 600x600mil
The ones below don't need the LENSes
Custom Made Board [7x2] 4P Bi-Color, Plain ver. 600x600mil
Custom Made Board [7x4] 4P Bi-Color, Plain ver. 600x600mil
Custom Made Board [7x6] 4P Bi-Color, Plain ver. 600x600mil
Bi-Color LED Strips
Bi-Color LED Strip, 4P x 19Ch, 15000x350mil
Side Support Panels
Support Panel Type-A
Support Panel Type-B
Modules
Sequential LED control module ver.1.10, for 1 color LED setup
Sequential LED control module ver.2.00, for 2 color LED setup
Pre-Cut wires
Pre-cut wire BLACK 22AWG 7.8inch/20cm
Pre-cut wire WHITE 22AWG 7.8inch/20cm
Pre-cut wire RED 22AWG 7.8inch/20cm
Pre-cut wire YELLOW 22AWG 7.8inch/20cm
Etc.
15 Pin Female header
40 Pin Male to Male wire 20cm
You Might Need

LED Switchback control modules VER.1 (for 1 color LED setup) | PAIR

Connect